Hantek IDS1070A – review (you have to get one!)

Hi, today I got the little review for you. It is about Hantek IDS1070A. First little specifications from the manufacturer.

Specifications

Model	IDSO1070A
Bandwidth	70MHz
Channels	2
Real-time sampling rate	250MSa/s (Single), 125MSa/s (Double)
Sampling Mode	Sample, VPP, Vavg
Average Sampling	Average waveform, Time: 4, 8, 16, 32, 64, 128
Memory Depth	6K
Rise Time	≤5ns
Timebase Accuracy	±50ppm
Timebase range	5ns/div-500s/div
Input Coupling	DC, AC, GND
Input Impedance	1MΩ 25pF
Attenuation	1×, 10×, 100×, 1000×
Max. Input VoltageS	35Vpk (DC+peak)
Waveform Interpolation	Step, Linear, Sin(x)/x
Input Sensitivity	10mV/div~5V/div
Vertical resolution	8Bit
Vertical adjustable	10mV ~ 5V/div @ x1 probe; 100mV ~ 50V/div @ x10 probe; 1V ~ 500V/div @ x100 probe; 10V ~ 5KV/div @ x1000 probe
Range	±4division
Low Frequency Response	≤10Hz (at input BNC)
DC Gain Accuracy	±3%
Bandwidth Limitation	20MHz
Trigger Mode	Auto, Normal and Single
Trigger Type	Rising edge, falling edge
Trigger Accuracy	±4division
Trigger Range	±4V
Trigger Sensitivity	0.02
Trigger Source	CH1, CH2, EXT
Waveform Calculation	+,-,x,÷,FFT,Invert
Auto Measurement	Vpp, Vamp, Vmax, Vmin, Vtop, Vmid, Vbase, Vavg, Vrms, Vcrms, Preshoot,  Overshoot, Frequency, Period, Rise Time, Fall Time, Positive Width, Negative Width, Duty Cycle
Size	190mm x 100mm x 35mm
Net weight	0.7KG

My conclusion

Buy it! Buy it now!

Ok back to earth. I write this review about 1 month after purchase. And I’m really amazed. Really good manufacture quality, accuracy measurements, handy (integrated battery and wifi). So if you need fast measurements you don’t have to move whole PCB or device to your work station, find a power outlet, etc. just take oscilloscope, turn it on and you are ready to go. Price is out of space (in the good way).

Before I buy it I was finding good desktop oscilloscope, read all review what was on the internet and chat with many users. I decided to totally leave table oscilloscope after I make a table with good table oscilloscopes and prices. The price for quality desktop oscilloscope is out of this space. If you looking for an oscilloscope with touch screen etc.

I realized, really I need spend 1k $ for scope? And answer was no. In real I need just few things:

• Handy control ( touch screen, or something similar ) – with this scope you can use the touchscreen on your tablet/phone or really good desktop application
• 2 channels – this scope got 2 channels and 1 trigger so compare input and output to part of your PCB is no a problem
• Price – this scope cost about 1/8 of good desktop oscilloscopes with the same parameters

Pros and cons

Video review

Where to buy

I really recommend you banggood site. They are really fast and good if you need replace broken items or package came damaged.

Here is link to buy: BUY HERE !